FlareCON™ 2.2.1 Apk
Rate saved, Thank!
3.8 (1 votes)
Description of FlareCON™
The FlareCON™ app runs on Android™ to control any CHAUVET® DJ Freedom™ or D-Fi™ receiver as well as any other LED static wash light from your smartphone or tablet (additional hardware required). The Wi-Fi™ signal is generated from the FlareCON™ Air hardware interface and no other Wi-Fi™ signals are needed. The FlareCON™ app sends out 6 color commands - red, green, blue, amber, white and ultraviolet, using the following DMX channel assignments: •Channel 1: Red (R) •Channel 2: Green (G) •Channel 3: Blue (B) •Channel 4: Amber (A) •Channel 5: White (W) •Channel 6: Ultraviolet (UV) Please note that lights using different channel assignments other than the one specified above will not work properly with FlareCON™ or the FlareCON™ Air hardware interface. CHAUVET® DJ static LED wash lights that are DMX-controllable but not D-Fi™-ready can still be controlled via the FlareCON™ Air with the addition of a D-Fi™ hub https://www.chauvetdj.com/products/d-fi-hub/. For additional information about the FlareCON™ Air hardware interface, please visit https://www.chauvetdj.com/products/flarecon-air/.