Car Finder (GPS) 1.5.6 Apk

This application is used to store the current position of the vehicle (or other object or place) using the GPS technology (your mobile device must be equipped with them). After saving the position of the vehicle can leave him (you can, of course, close the application and even turn off the phone). When you want to go back to the vehicle, start the application, which automatically when connected to a GPS satellite will indicate the direction in which we should follow in order to get to the saved location (eg. car parked in the parking or in the woods during the mushroom). You can of course edit the saved position manually.The application also provides direction in addition to the distance (in straight line) from the vehicle, and the speed of movement. These data are shown in real time, but only when there is an active connection to the satellite (GPS signal found). The application has also been enhanced with support for Magnetic Fields, it can be run in the Settings app - unfortunately, not every mobile device is equipped with them. Short instruction: 1. When you want to save the position of the car (or any other target), wait for the GPS signal. 2. When device connects to the GPS satellite you will see your current position at the top of the screen. 3. Then press on the blue button to save actual position for the CAR (if you long press it, you will open a window where you can enter the CAR coordinates manually). 4. Move away from the vehicle. 5. If you want go back to saved location then open the application, wait for the GPS connection and follow the compass indication. Additional information: The application works without Internet. GPS sensor is necessary. The application contains advertisements.