LA LINCE H24 1.19 Apk

LA LINCE H24 is the La Lince Vigilanza application that allows users to remotely manage the Unica, Dogma and One alarm control units from the comfort of their smartphone or tablet!

Through this application, the user can control various functions of the alarm system depending on the model of control unit installed. The Application provides for the control of up to 50 systems in Cloud, WEB, Tunnel or SMS mode.

The main functions in Cloud, WEB and Tunnel mode are listed:

- View the status, arm and disarm the individual areas of the system;
- Check for faults or anomalies;
- Check the presence and delete the alarm memory;
- View the status of the outputs and activate them;
- Take pictures if there are sensors equipped with a camera;
-Access the event history, and view any associated photos;
- View the status of the system zones and eventually enable / disable them;
- View information about the SIM and the GSM signal level of the control panel;

The main features in SMS mode are listed:

- View the status, arm and disarm the individual areas of the system;
- View the status of the outputs and activate them;
- View information on the SIM;

Application working with all Android versions later than 4.0 both on smartphones and tablets.

To connect to in Cloud mode from the alarm control unit side, a permanent connection to the internet is required without the need to open doors.

For the connection in WEB mode from the alarm control unit side, a WAN connection is required. Router port to open: 8002.

For communication in SMS mode, the control unit must be equipped with a GSM communicator.

Firmware version required on the Unica control panel: 1.2.0.B121 or later.

The OnDemand feature is only available for Android versions 6.0 or later.

Default pin: 12345