Scoppy - Oscilloscope and Logic Analyzer 1.016 Apk

Combine Scoppy with a Raspberry Pi Pico to create a 500kS/s oscilloscope and 25MS/s logic analyzer. Key Features: - Horizontal scale and position adjustments - Vertical scale and position adjustments - Trigger channel and level selection - Rising edge and falling edge triggers - Auto and Normal triggering - Continuous (Run) and Single capture modes - Memory depth up to 100kpts for single captures - Vertical and Horizontal Cursors - Auto or fixed sample rate - % pre-trigger samples setting - Signal Generator --- square wave (100Hz - 1.25MHz) --- 1kHz PWM sine wave Oscilloscope - Two Channels - Up to 500k samples per second (shared between channels) - Time/Div: 5us - 20secs - Up to 4 configurable voltage ranges per channel (see help for details) Logic Analyzer - Eight Channels - Up to 25M samples per second (per channel) - Time/Div: 50ns - 100ms Analog Front End Connect the input signal directly to the Pico ADC pins for 0-3.3V inputs or build your own analog front end. Several cheap and easy to build open-source designs can be found at oscilloscope.fhdm.xyz More information More information including instructions for installing the (free and open-source) firmware onto your Pico can be found here: https://github.com/fhdm-dev/scoppy and https://oscilloscope.fhdm.xyz